Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP7010 — Trang 2/3

Code: 72

Description: Cannot detect Beam Detect signal.
Causes: Laser unit defective Main PCB defective

Code: 73

Description: The drum unit is not mounted.
Causes:

Code: 74

Description: Toner empty
Causes: Toner sensor defective Toner empty

Code: 75

Description: In casing temperature error.
Causes: In casing temperature sensor defective

Code: 76

Description: Heater overheat
Causes: Thermistor defective in Fixing unit Halogen heater defective

Code: 77

Description: The power supply is turned off when the error 76 or 78 occurs.
Causes:

Code: 78

Description: Temperature of the heater does not rise
Causes: Poor connection in the harness of the halogen lamp Halogen lamp defective Thermistor defective PS PCB unit defective Main PCB defective

Code: 79

Description: In casing temperature sensor harness disconnected or broken.
Causes: LVPS unit defective Main PCB defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie