Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP7180N — Trang 9/10

Code: BD00

Display: Scanner Error
Description: A black level not within the standard was scanned when function code 55 was executed.
Remedy: 1 Dirt on the second side document hold Clean the second side document hold. 2 Dirt on the white tape Clean the white tape. 3 First side CIS unit failure Replace the first side CIS unit. 4 Second side CIS unit failure Replace the second side CIS unit. 5 Second side document hold failure Replace the ADF unit. 6 White tape failure Replace the document scanner unit. 7 Main PCB failure Replace the main PCB ASSY.

Code: BF00

Display: Scan Unable Document is too long for 2-sided scanning. Press Stop key.
Description: The first side document scanning position sensor detected that the ADF was unable to duplex-feed the document because the document length is 400 mm or longer.
Remedy: <User Check> • Set A4 or Letter size paper. • Remove the jammed document. 1 First side document scanning position actuator caught in some sections of the machine Reattach the first side document scanning position actuator. 2 First side document scanning position sensor failure Replace the first side document scanning position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: C700

Display: Out of Memory Press Stop Key.
Description: There is insufficient memory to expand PC print data.
Remedy: <User Check> • Print the print data stored in the memory. • Divide the print data and print them separately. 1 Main PCB failure Replace the main PCB ASSY.

Code: C800

Display: Print Data Full Print Data is full. Press Stop and delete the previously stored data.
Description: The memory size allotted for Secure print was exceeded when saving Secure print data.
Remedy: <User Check> • Print the print data stored in the memory. • Divide the print data and print them separately. 1 Main PCB failure Replace the main PCB ASSY.

Code: D100

Display: Print Unable D1 Turn the power off and then back on again.
Description: An error occurred while initializing the modem.
Remedy: 1 Modem PCB failure Replace the modem PCB ASSY. 2 Main PCB failure Replace the main PCB ASSY.

Code: D200

Display: Machine Error Unplug machine, then call Brother.
Description: Detected the modem PCB was not connected.
Remedy: 1 Connection failure of the modem flat cable Reconnect the modem flat cable. 2 Modem PCB failure Replace the modem PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: D800

Display: Print Unable D8 Turn the power off and then back on again.
Description: An error occurred while initializing the touch panel.
Remedy:

Code: D900

Display:
Description: Communication between the panel PCB and main PCB was unable while initializing the touch panel.
Remedy: <User Check> • Check that there is no object on the touch panel. • Install the latest firmwares (panel firmware and main firmware). 1 Connection failure of the touch panel flat cable Reconnect the touch panel flat cable. 2 Touch panel failure Replace the touch panel ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie