Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP8025D — Trang 2/8

Code: 5E

Description: MP tray sensor remains OFF.
Causes: • MP tray sensor

Code: 5F

Description: DX unit sensor is inactivated.
Causes: • DX unit sensor

Code: 6A

Description: Heater warming-up timeout error. (Heater does not reach 60°C within 11 sec.)
Causes: • Thermistor ASSY • Halogen lamp

Code: 6B

Description: Heater warming-up timeout error. (Heater does not reach 100°C within 15 sec.)
Causes: • Thermistor ASSY • Halogen lamp

Code: 6C

Description: Heater temperature exceeds the maximum high temperature. (270°C or more is detected for 1 sec.)
Causes: • Thermistor ASSY • Power supply PCB

Code: 6D

Description: Heater temperature lowers the minimum low temperature. (60°C or less is detected for 1 sec.)
Causes: • Thermistor ASSY • Power supply PCB

Code: 6E

Description: Heater temperature does not go up enough. (Slower temperature rise rate than 2°C/5 sec. is detected.)
Causes: • Halogen lamp • Power supply PCB

Code: 6F

Description: Heater hard limiter operates.
Causes: • Thermistor ASSY • Power supply PCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie