Danh mục sản phẩm

Code :

Code: 5E
Description: MP tray sensor remains OFF.
Causes: • MP tray sensor

Code: 5F
Description: DX unit sensor is inactivated.
Causes: • DX unit sensor

Code: 6A
Description: Heater warming-up timeout error. (Heater does not reach 60°C within 11 sec.)
Causes: • Thermistor ASSY • Halogen lamp

Code: 6B
Description: Heater warming-up timeout error. (Heater does not reach 100°C within 15 sec.)
Causes: • Thermistor ASSY • Halogen lamp

Code: 6C
Description: Heater temperature exceeds the maximum high temperature. (270°C or more is detected for 1 sec.)
Causes: • Thermistor ASSY • Power supply PCB

Code: 6D
Description: Heater temperature lowers the minimum low temperature. (60°C or less is detected for 1 sec.)
Causes: • Thermistor ASSY • Power supply PCB

Code: 6E
Description: Heater temperature does not go up enough. (Slower temperature rise rate than 2°C/5 sec. is detected.)
Causes: • Halogen lamp • Power supply PCB

Code: 6F
Description: Heater hard limiter operates.
Causes: • Thermistor ASSY • Power supply PCB

< 1 2 3 4 5 > Last ›

0