Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP8150DN — Trang 12/12

Code: EC00

Description: Detected a main fan failure.
Causes: 1 Connection failure of the main fan harness. 2 Connection failure of the toner LED PCB harness. 3 Main fan failure. 4 Toner LED PCB failure. 5 Main PCB failure.
Remedy: 1 Connection failure of the main fan harness Check the connection of the main fan harness, and reconnect it if necessary. 2 Connection failure of the toner LED PCB harness Check the connection of the toner LED PCB harness, and reconnect it if necessary. 3 Main fan failure Replace the main fan. 4 Toner LED PCB failure Refer to "1.3.10 Check sensor operation (function code: 32)" in Chapter 5 to check the sensor operation. If the sensor operation is faulty, replace the toner LED PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.

Code: ED00

Description: Communication between the wireless LAN PCB and the main PCB cannot be established at machine startup.
Causes: 1 Connection failure of the wireless LAN PCB harness. 2 Wireless LAN PCB failure. 3 Main PCB failure.
Remedy: 1 Connection failure of the wireless LAN PCB harness Check the connection of the wireless LAN PCB harness, and reconnect it if necessary. 2 Wireless LAN PCB failure Replace the wireless LAN PCB. 3 Main PCB failure Replace the main PCB ASSY.

Code: EE00

Description: Detected communication failure after communication between the wireless LAN PCB and the main PCB was established.
Causes: 1 Wireless LAN PCB failure. 2 Main PCB failure.
Remedy: 1 Wireless LAN PCB failure Replace the wireless LAN PCB. 2 Main PCB failure Replace the main PCB ASSY.

Code: EF00

Description: Unstable power supply was detected.
Causes: 1 Low-voltage power supply PCB failure. 2 Main PCB failure.
Remedy: 1 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY, and then reset the irregular power supply detection counter. 2 Main PCB failure Replace the main PCB ASSY.

Code: F000

Description: Malfunction of the flash memory on the main PCB
Causes: 1 Main PCB failure.
Remedy: Replace the main PCB ASSY.

Code: F900

Description: The country code was not entered correctly.
Causes: 1 Power switch was turned OFF while PARAMETER INIT is displayed during execution of function code 74.
Remedy: 1 Power switch was turned OFF while "PARAMETER INIT" is displayed during execution of function code 74. Reenter the country code. " in Chapter 5.)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie