Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9010CN — Trang 18/19

Code: E6

Description: Write error in EEPROM
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: E9

Description: Maintenance monitor error
Causes: 1 Harness connection failure of engine PCB ASSY. 2 Engine PCB failure. 3 Main PCB failure.
Remedy: 1 Harness connection failure of engine PCB ASSY Check the harness connection between the main PCB ASSY and engine PCB ASSY, and reconnect it. 2 Engine PCB failure Replace the engine PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: EC

Description: Main fan error
Causes: 1 Connection failure of main fan connector. 2 Main fan failure. 3 HVPS control PCB failure. 4 High-voltage power supply PCB failure. 5 Engine PCB failure. 6 Main PCB failure.
Remedy: 1 Connection failure of main fan connector Check the connection of the main fan connector and reconnect it. 2 Main fan failure Replace the main fan ASSY. 3 HVPS control PCB failure Replace the HVPS control PCB ASSY. 4 High-voltage power supply PCB failure Replace the high-voltage power supply PCB ASSY. 5 Engine PCB failure Replace the engine PCB ASSY. 6 Main PCB failure Replace the main PCB ASSY.

Code: EF

Description: Low-voltage power supply PCB failure
Causes: 1 Low-voltage power supply PCB failure. 2 Main PCB failure.
Remedy: 1 Low-voltage power supply PCB failure Replace the low-voltage power supply PCB ASSY. 2 Main PCB failure Replace the main PCB ASSY.

Code: F2

Description: Waste toner box near full
Causes: 1 HVPS control PCB failure. 2 Engine PCB failure.
Remedy: 1 HVPS control PCB failure Replace the HVPS control PCB ASSY. 2 Engine PCB failure Replace the engine PCB ASSY.

Code: F4

Description: Waste toner box life end
Causes: 1 HVPS control PCB failure. 2 Engine PCB failure.
Remedy: 1 HVPS control PCB failure Replace the HVPS control PCB ASSY. 2 Engine PCB failure Replace the engine PCB ASSY.

Code: F8

Description: Battery connection error
Causes: 1 Harness connection failure of battery. 2 Battery failure. 3 Main PCB failure.
Remedy: 1 Harness connection failure of battery Check the connection of the battery connector and reconnect it. 2 Battery failure Replace the battery ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: F9

Description: Power turned OFF while the function code 74 is being executed and “PARAMETER INT” is being displayed
Causes: 1 Incorrect operation when setting EEPROM customize code.
Remedy: 1 Incorrect operation when setting EEPROM customize code Re-enter the EEPROM customize code.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie