Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9020CDN — Trang 13/18

Code: 9801

Display: Calibration failed See Troubleshooting chapter in User's Guide.
Description: Error occurred with the value measured during color density adjustment performed from the control panel.
Causes: 1 Registration mark sensor L dirty 2 Failure in printed measurement pattern image 3 Registration mark L PCB harness connection failure 4 Eject sensor PCB harness connection failure 5 Density sensor failure 6 Main PCB failure

Code: 9802

Display: Calibration failed Insufficient Toner for Calibration
Description: Dot counter or develop roller counter of color toner has reached the upper limit during color density adjustment performed from the control panel.
Causes: Main PCB failure

Code: 9803

Display: Calibration failed Press [OK], and try again
Description: Density patch measurement ended unsuccessfully during color density adjustment performed from the control panel.
Causes: 1 Registration mark sensor L dirty 2 Failure in printed measurement pattern image 3 Registration mark L PCB harness connection failure 4 Eject sensor PCB harness connection failure 5 Density sensor failure 6 Main PCB failure

Code: 9804

Display: Calibration failed Press [OK], and try again
Description: Error occurred with the value measured during density sensor sensitivity calibration.
Causes: 1 Registration mark sensor L dirty 2 Failure in printed measurement pattern image 3 Registration mark L PCB harness connection failure 4 Eject sensor PCB harness connection failure 5 Density sensor failure 6 Main PCB failure

Code: 9901

Display: Registration failed See Troubleshooting chapter in User's Guide
Description: Error occurred with the value measured during adjustment of color registration.
Causes: 1 Registration mark sensor L/ registration mark sensor R dirty 2 Registration mark L PCB/ Registration mark R PCB harness connection failure 3 Eject sensor PCB harness connection failure 4 Failure in printed measurement pattern image 5 Registration mark L failure 6 Registration mark R failure 7 Main PCB failure

Code: 9902

Display: Registration failed Press [OK], and try again.
Description: Dot counter or develop roller counter of color toner has reached the upper limit during adjustment of color registration.
Causes: Main PCB failure

Code: 9903

Display: Registration failed Press [OK], and try again.
Description: Error occurred during patch data printing in adjustment of color registration.
Causes: 1 Registration mark sensor L/ registration mark sensor R dirty 2 Registration mark L PCB/ Registration mark R PCB harness connection failure 3 Eject sensor PCB harness connection failure 4 Failure in printed measurement pattern image 5 Registration mark L failure 6 Registration mark R failure 7 Main PCB failure

Code: 9A01

Display: Registration failed See Troubleshooting chapter in User's Guide.
Description: Error occurred with the value measured during auto color registration performed from the control panel.
Causes: 1 Registration mark sensor L/ registration mark sensor R dirty 2 Registration mark L PCB/ Registration mark R PCB harness connection failure 3 Eject sensor PCB harness connection failure 4 Failure in printed measurement pattern image 5 Registration mark L failure 6 Registration mark R failure 7 Main PCB failure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie