Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9042CDN — Trang 8/15

Code: 6E

Description: Fuser unit failure (The center thermistor does not detect temperature rising within the specified
time.)
Causes: 1 Fuser unit failure. 2 Low-voltage power supply PCB failure. 3 Engine PCB failure.
Remedy: 1 Fuser unit failure Replace the fuser unit. 2 Low-voltage power supply PCB failure Replace the PS PCB unit. 3 Engine PCB failure Replace the engine PCB ASSY.

Code: 6F

Description: Fuser unit failure (The center and side thermistors detect extremely high temperature.)
Causes: 1 Fuser unit failure. 2 Low-voltage power supply PCB failure. 3 Engine PCB failure.
Remedy: 1 Fuser unit failure Replace the fuser unit. 2 Low-voltage power supply PCB failure Replace the PS PCB unit. 3 Engine PCB failure Replace the engine PCB ASSY.

Code: 71

Description: Polygon motor failure
Causes: 1 Laser unit harness connection failure. 2 Laser unit failure. 3 Engine PCB failure.
Remedy: 1 Laser unit harness connection failure Check the two harness connections of the laser unit and reconnect them. 2 Laser unit failure Replace the laser unit. 3 Engine PCB failure Replace the engine PCB ASSY.

Code: 72

Description: Beam detecting sensor (K) failure
Causes: 1 Laser unit harness connection failure. 2 Laser unit failure. 3 Engine PCB failure.
Remedy: 1 Laser unit harness connection failure Check the two harness connections of the laser unit and reconnect them. 2 Laser unit failure Replace the laser unit. 3 Engine PCB failure Replace the engine PCB ASSY.

Code: 73

Description: Beam detecting sensor (C) failure
Causes: 1 Laser unit harness connection failure. 2 Laser unit failure. 3 Engine PCB failure.
Remedy: 1 Laser unit harness connection failure Check the two harness connections of the laser unit and reconnect them. 2 Laser unit failure Replace the laser unit. 3 Engine PCB failure Replace the engine PCB ASSY.

Code: 74

Description: Toner cartridge whose color is used reaches the end of life during printing.
Causes: 1 Toner sensor PCB (TE/NEW) failure (Toner empty). 2 Engine PCB failure.
Remedy: 1 Toner sensor PCB (TE/NEW) failure (Toner empty) Check the sensor performance following the procedure described in “Maintenance mode 32”. If any problem occurs, replace the toner sensor PCB (TE/NEW) of the appropriate color. 2 Engine PCB failure Replace the engine PCB ASSY.

Code: 75

Description: Machine cooling down inside
Causes:
Remedy:

Code: 76

Description: Fuser unit failure
Causes: 1 Fuser unit failure
Remedy: Replace the fuser unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie