Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9045CDN — Trang 5/15

Code: 53

Description: Replace the LT paper feeding kit
Causes:
Remedy:

Code: 54

Description: Replace the fuser unit
Causes:
Remedy:

Code: 55

Description: Replace the laser unit
Causes:
Remedy:

Code: 56

Description: Back cover opened
Causes: 1 Back cover switch failure. 2 Harness connection failure of back cover switch ASSY. 3 Part pressing the back cover switch is broken, which is provided at the right side of back cover on the inside. 4 Engine PCB failure.
Remedy: 1 Back cover switch failure Check the sensor performance following the procedure described in “Maintenance mode 32”. 2 Harness connection failure of back cover switch ASSY Check the harness connection of the back cover switch ASSY and reconnect it. 3 Part pressing the back cover switch is broken, which is provided at the right side of back cover on the inside. Replace the back cover switch ASSY. 4 Engine PCB failure Replace the engine PCB ASSY.

Code: 57

Description: Paper jam while turning it over in duplex printing or DX solenoid failure
Causes:
Remedy:

Code: 58

Description: Fuser unit failure
Causes: 1 Harness connection failure between fuser unit connector and engine PCB. 2 Fuser unit failure. 3 Low-voltage power supply PCB failure. 4 Engine PCB failure.
Remedy: 1 Harness connection failure between fuser unit connector and engine PCB Check the harness connection between the fuser unit connector and engine PCB, and reconnect it. 2 Fuser unit failure Replace the fuser unit. 3 Low-voltage power supply PCB failure Replace the PS PCB unit. 4 Engine PCB failure Replace the engine PCB ASSY.

Code: 59

Description: Fuser unit failure
Causes: 1 Harness connection failure between fuser unit connector and engine PCB. 2 Fuser unit failure. 3 Low-voltage power supply PCB failure. 4 Engine PCB failure.
Remedy: 1 Harness connection failure between fuser unit connector and engine PCB Check the harness connection between the fuser unit connector and engine PCB, and reconnect it. 2 Fuser unit failure Replace the fuser unit. 3 Low-voltage power supply PCB failure Replace the PS PCB unit. 4 Engine PCB failure Replace the engine PCB ASSY.

Code: 5A

Description: Charge HVPS PCB ASSY failure
Causes: 1 Charge HVPS PCB ASSY harness connection failure. 2 Charge HVPS PCB failure. 3 Engine PCB failure.
Remedy: 1 Charge HVPS PCB ASSY harness connection failure Check the harness connection between the charge HVPS PCB and engine PCB, and the one between the charge HVPS PCB and low-voltage power supply PCB. Then, reconnect them. 2 Charge HVPS PCB failure Replace the charge HVPS PCB ASSY. 3 Engine PCB failure Replace the engine PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie