Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother MFC1810 — Trang 6/8

Code: 9601

Display: Wrong Paper Type Reload with A4, Letter, Legal or Folio paper, and press Start.
Description: The paper feed sensor detected that the paper width was narrower than A4 size.
Remedy: • Set A4/letter size paper or bigger.
1 Paper feed actuator L/R coming off Reattach the paper feed actuator L/R. 2 Paper feed sensor failure Replace the paper feed/paper printing position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 9608

Display: Wrong Paper Type Reload with A4, Letter, Legal or Folio paper, and press Start.
Description: The paper feed sensor detected that the paper length was shorter than the specified size.
Remedy: • Set A4/letter size paper or bigger.
1 Paper feed actuator L/R coming off Reattach the paper feed actuator L/R. 2 Paper feed sensor failure Replace the paper feed/paper printing position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: A200

Display: Document Jam Clear the scanner jam, then press the Stop Key.
Description: The document scanning position sensor detected that the document length was 90 cm or more while scanning a document.
Remedy: • Use A4 size paper or smaller. • Remove the jammed document.
1 Document scanning position actuator caught in sections of the machine Reattach the document scanning position actuator. 2 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: A300

Display: Document Jam Clear the scanner jam, then press the Stop Key.
Description: The document scanning position sensor has not detected the document passing even after the document has been fed for the specified distance.
Remedy: 1 Document scanning position actuator coming off Reattach the document scanning position actuator. 2 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: A500

Display: Scan Unable A5 Remove the original document. Turn the power off, then on again
Description: When scanning the fax, white or black correction data for the CIS was not within the correct range.
Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

Code: A600

Display: Scan Unable A6 Turn the power off and then back on again.
Description: Although operation was retried due to error A500 that occurred while scanning the fax, white or black correction data for the CIS was not within the correct range.
Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

Code: A700

Display: Print Unable A7 Turn the power off and then back on again.
Description: Color parameter in the ROM does not match the CIS.
Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

Code: A800

Display: Print Unable A8 See Troubleshooting and routine maintenance chapter in User's Guide.
Description: An error was detected in the color parameter in the ROM during scanned image processing.
Remedy: 1 Incorrect correction data for CIS unit Execute function code 55. 2 Connection failure of the CIS flat cable Reconnect the CIS flat cable. 3 CIS unit failure Replace the CIS unit. 4 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie