Mã lỗi Brother MFC4820C — Trang 3/8
Code:
50
Description: The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of pulses.
Remedy: • Purge unit • Engine lower frame • Paper feed motor •Main PCB
Code:
51
Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses.
Remedy:
Code:
52
Description: The purge cam HP switch does not detect the origin point.
Remedy: • Purge unit • Engine lower frame • Paper feed motor •Main PCB
Code:
54
Description: The air pump motor does not rotate.
Remedy:
Code:
55
Description: The air pump motor rotates abnormally. (This code may appear only in the maintenance mode.)
Remedy: • Air pump & motor module • Driver PCB
Description: Paper width sensor (media sensor) error.
Remedy: • Replace the needle tube & head flat cable ASSY
Code:
68
Description: The ASF switch remains OFF after the ASF motor is driven by the specified steps.
Remedy:
Code:
69
Description: The ASF switch remains ON after the ASF motor is driven by the specified steps.
Remedy: