Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother MFC7000FC

Code: 10

Description: When the light source (fluorescent lamp) was OFF, no A/D reference values of CCD video signals could be detected since it is less than the lower limit.
Causes: • Fluorescent lamp • Inverter PCB • Mirrors • Scanner frame ASSY • Main PCB

Code: 13

Description: When the light source (fluorescent lamp) was ON, the A/D reference values of CCD video signals were less than the lower limit.
Causes:

Code: 14

Description: When the light source (fluorescent lamp) was ON, the A/D reference values of CCD video signals exceeded the upper limit.
Causes:

Code: 20

Description: Head driver temperature error.
Causes: • Print head unit • Main PCB

Code: 21

Description: No purge operation has started although commanded.
Causes: • Main PCB

Code: 22

Description: A sequence of purge operation could not finish.
Causes:

Code: 23

Description: Internal Centronics interface timeout.
Causes: • Print head unit • Main PCB

Code: 31

Description: The carriage cannot travel to the right or left.
Causes: Before checking the following components, check the carriage movement as described in (Note 1) given on the next page. • Carriage ASSY • Encoder strip (Any stains or scratches? Hooked correctly?) • Paper feed motor • Hook switch PCB • Main PCB • Power supply PCB • Flushing box • Purge unit • CR base ASSY • Ink empty sensor PCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie