Description: When the light source (fluorescent lamp) was OFF, no A/D reference values of CCD video signals could be detected since it is less than the lower limit.
Description: The carriage cannot travel to the right or left.
Causes: Before checking the following components, check the carriage movement as described in (Note 1) given on the next page. • Carriage ASSY • Encoder strip (Any stains or scratches? Hooked correctly?) • Paper feed motor • Hook switch PCB • Main PCB • Power supply PCB • Flushing box • Purge unit • CR base ASSY • Ink empty sensor PCB
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.