Mã lỗi Brother MFC7160C — Trang 3/6
Code:
46
Description: The number of performed purge sequences has reached the limit.
Code:
4B
Description: Abnormal carriage travel speed detected when the power was applied.
Code:
4C
Description: Head rated voltage data stored in the EEPROM on the head PCB is invalid. (This code may appear only in the maintenance mode.)
Code:
50
Description: The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of
pulses.
Code:
51
Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of
pulses.
Code:
52
Description: At the time of purge operation, the carriage has not stopped in the purge position.
Code:
53
Description: The purge cam HP switch has come ON when the carriage was in the wipe position.
Code:
54
Description: When reset, the purge cam HP switch does not come ON even after the purge cam has been driven by the specified
number of pulses.