Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother MFC7340 — Trang 5/6

Code: 9F

Description: Paper empty
(It is detects by the registration front sensor)
Causes:
Remedy: • Replenish the paper in the paper tray. 1 Registration front actuator catching in some position Re-assemble the registration front actuator. 2 Registration front sensor PCB harness connection failure Check the harness connection of the registration front sensor PCB and reconnect it. 3 Registration front sensor PCB failure Replace the registration front sensor PCB. 4 Main PCB failure Replace the main PCB ASSY.

Code: A1

Description: Front cover open
Causes:
Remedy: • Close the front cover. 1 Harness connection failure of cover sensor harness ASSY. Check the harness connection of the cover sensor harness ASSY, and reconnect it. 2 Cover sensor harness ASSY failure Replace the cover sensor harness ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: A2

Description: Document is too long.
(During scanning, 90 cm or longer of a document is detected.)
Causes:
Remedy: • Check if the document is jammed in the ADF. If it is jammed, remove it. 1 Document rear actuator not operating smoothly or catching in some position. Ensure smooth operation and that there is no catching of document rear actuator.

Code: A3

Description: Document rear sensor is not turned on when feeding the document.
Causes:
Remedy: • Check if the document is jammed in the ADF. If it is jammed, remove it. 1 Document rear actuator not operating smoothly or catching in some position. Ensure smooth operation and that there is no catching of document rear actuator. 2 Document rear sensor failure. Replace the document rear sensor. 3 ADF motor failure Replace the ADF motor.

Code: A5

Description: Fax scanning error (First warning only)
Causes:
Remedy: 1 Scanning failure Turn the power switch off and on. Then, try scanning again.

Code: A6

Description: Fax scanning error (The second warning that the same error with A5 occurs again)
Causes:
Remedy: 1 FB unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.

Code: AD

Description: DMA transfer error
Causes:
Remedy: 1 FB unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY

Code: AF

Description: FB unit home position failure
Causes:
Remedy: 1 FB unit failure Replace the FB unit. 2 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie