Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother MFC7480D — Trang 4/10

Code: 4C01

Display: Replace Toner Open the Front Cover, replace Toner Cartridge.
Description: Dot count or develop roller counter of the toner has reached the upper limit in the toner stop mode.
Remedy: <User Check> • Replace the toner cartridge which has reached the upper limit. 1 If the error display is not cleared after replacing the toner cartridge with a new one, the main PCB is faulty. Replace the main PCB ASSY.

Code: 4D01

Display: Replace Toner
Description: Dot count or develop roller counter of the toner has reached the upper limit in the toner continuous printing mode.
Remedy: <User Check> • Replace the toner cartridge which has reached the upper limit. 1 If the error display is not cleared after replacing the toner cartridge with a new one, the main PCB is faulty. Replace the main PCB ASSY.

Code: 4E01

Display: Toner Ended Open the Front Cover, replace Toner Cartridge.
Description: The toner cartridge has reached the upper limit in the toner continuous printing mode.
Remedy: <User Check> • Replace the toner cartridge which has reached the upper limit. 1 If the error display is not cleared after replacing the toner cartridge with a new one, the main PCB is faulty. Replace the main PCB ASSY.

Code: 4F01

Display: Cartridge Error Put the Toner Cartridge back in.
Description: The new toner sensor could not detect the new toner cartridge correctly.
Remedy: <User Check> • Replace the toner cartridge with a new one again. • If the machine is on the uneven surface, place it on a level surface. 1 Connection failure of the new toner sensor PCB flat cable Reconnect the new toner sensor PCB flat cable. 2 New toner actuator coming off or caught in sections of the machine Reattach the new toner actuator. 3 Develop joint coming off or caught in sections of the machine Reattach the develop joint. 4 New toner sensor failure Replace the new toner sensor PCB ASSY. 5 If the error display is not cleared after replacing the toner cartridge with a new one, the main PCB is faulty. Replace the main PCB ASSY.

Code: 6001

Display: Cover is Open Close the Front Cover.
Description: The front cover sensor detected that the front cover was open.
Remedy: <User Check> • Close the front cover. 1 Front cover failure Replace the front cover. 2 Front cover sensor failure Replace the high-voltage power supply PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.

Code: 6004

Display: Cover is Open Close the Fuser Cover which can be found behind the Back Cover of the machine.
Description: The eject sensor detected that the fuser cover was open.
Remedy: <User Check> • Close the fuser cover. 1 Eject actuator coming off or caught in sections of the machine Reattach the eject actuator. 2 Fuser cover attachment failure Reattach the fuser cover. 3 Connection failure of the eject sensor PCB flat cable Reconnect the eject sensor PCB flat cable. 4 Eject sensor PCB failure Replace the eject sensor PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.

Code: 6101

Display: No Toner Open the Front Cover, then install Toner Cartridge.
Description: The new toner sensor detected that the toner cartridge was not set.
Remedy: <User Check> • Set the toner cartridge correctly. • Replace the toner cartridge with a new one. 1 New toner actuator coming off Reattach the new toner actuator. 2 Connection failure of the new toner sensor PCB flat cable Reconnect the new toner sensor PCB flat cable. 3 New toner sensor PCB failure Replace the new toner sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: 6801

Display: Cooling Down Wait for a while
Description: The side thermistor of the fuser unit or the internal temperature sensor detected a temperature higher than the specified value.
Remedy: <User Check> • Lower the room temperature. • Keep the machine away from heating appliances. 1 Side thermistor failure Replace the fuser unit. 2 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie