Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother MFC760 — Trang 3/6

Code: 46

Description: The number of performed purge sequences has reached the limit.

Code: 4B

Description: Abnormal carriage travel speed detected when the power was applied.

Code: 4C

Description: Head rated voltage data stored in the EEPROM on the head PCB is invalid. (This code may appear only in the maintenance mode.)

Code: 50

Description: The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of
pulses.

Code: 51

Description: The purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of
pulses.

Code: 52

Description: At the time of purge operation, the carriage has not stopped in the purge position.

Code: 53

Description: The purge cam HP switch has come ON when the carriage was in the wipe position.

Code: 54

Description: When reset, the purge cam HP switch does not come ON even after the purge cam has been driven by the specified
number of pulses.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie