Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother MFC7860DN

Code: 0F

Description: The back cover is open upon duplex-printing. (The back cover sensor is OFF)
Causes: 1 Harness connection failure of paper eject sensor PCB ASSY. 2 The member part to press the back cover sensor which is located at the inner side of the back cover is broken. 3 The member part to press the back cover sensor which is located at the duplex tray is broken. 4 Back cover sensor failure. 5 Main PCB failure
Remedy: 1 Harness connection failure of paper eject sensor PCB ASSY Check the harness connection of the paper eject sensor PCB ASSY and reconnect it. 2 The member part to press the back cover sensor which is located at the inner side of the back cover is broken. Replace the back cover. 3 The member part to press the back cover sensor which is located at the duplex tray is broken. Replace the duplex tray. 4 Back cover sensor failure Replace the paper eject sensor PCB ASSY. 5 Main PCB failure Replace the main PCB ASSY.

Code: 1E

Description: The drum unit will reach the end of life soon.
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 24

Description: Internal temperature sensor error.
Causes:
Remedy: 1 Harness connection failure of internal temperature sensor Check the harness connection of internal temperature sensor and reconnect it. 2 Internal temperature sensor failure Replace the internal temperature sensor. 3 Main PCB failure Replace the main PCB ASSY.

Code: 36

Description: Error in the high voltage power suply PCB while the machine is in the standby mode.
Causes:
Remedy: 1 High voltage power supply PCB failure Replace the high voltage power supply PCB ASSY. 2 Harness connection failure of high voltage power supply PCB Check the harness connection of the high voltage power supply PCB and reconnect it. 3 Main PCB failure Replace the main PCB ASSY.

Code: 3B

Description: Main PCB DRAM access error.
Causes: 1 Main PCB failure
Remedy:

Code: 44

Description: The toner cartridge is not installed.
Causes:
Remedy: 1 Dirt on the electrode of the drum unit and on the machine Clean the dirt on the contact points of the both electrodes. 2 Harness connection failure of high voltage power supply PCB Check the harness connection of the high voltage power supply PCB and reconnect it. 3 High voltage power supply PCB failure Replace the high voltage power supply PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.

Code: 50

Description: Drum unit is at the end of life. (Continue printing)
Causes: 1 Main PCB failure
Remedy: Replace the main PCB ASSY.

Code: 56

Description: The fuser cover is open.
Causes: • Close the fuser cover properly.
Remedy: 1 Paper eject actuator catching on some position Correct the position of the paper eject actuator. 2 Paper eject sensor PCB failure Check the sensor performance following the procedure described in "Function code 32". If any problem occurs, replace the paper eject sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie