Causes: 1 Power off or front cover opened while detecting a new toner cartridge. 2 New toner sensor failure.
Remedy: 1 Power off or front cover opened while detecting a new toner cartridge Reset the developing bias voltage and develop roller counter. 2 New toner sensor failure Replace the relay front PCB.
Description: Excess current to USB device that is front side of the machine
Causes: 1 Harness connection failure of USB host relay PCB ASSY. 2 USB host relay PCB failure. 3 Main PCB failure.
Remedy: 1 Harness connection failure of USB host relay PCB ASSY Check the harness connection of the USB host relay PCB ASSY and reconnect it. 2 USB host relay PCB failure Replace the USB host relay PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Description: Drum unit is not installed into the machine
Causes: 1 Dirt on electrodes on drum unit and machine body. 2 HVPS PCB unit failure. 3 Main PCB failure
Remedy: 1 Dirt on electrodes on drum unit and machine body Clean both electrodes. 2 HVPS PCB unit failure Replace the HVPS PCB unit. 3 Main PCB failure Replace the main PCB ASSY.