Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon CLC4040 — Trang 21/27

Code: E5F6-8003

Description: Saddle sheet push plate stapler error
When the sheet push plate edge position sensor fails to turn OFF even when the sheet push plate motor has been run for at least 80 ms
Remedy: - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S).

Code: E5F6-8004

Description: Saddle sheet push plate stapler error
When the number of pulses detected by the sheet push plate motor clock sensor has dropped below the prescribed number
Remedy: - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S).

Code: E5F6-8005

Description: Saddle sheet push plate stapler error
When the sheet push plate edge position sensor fails to turn ON even when the sheet push plate motor has been run for at least 0.3 sec.
Remedy: - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S).

Code: E5F9-8001

Description: Saddle switch error
When the entrance door switch is in the open status even when all the covers are closed
Remedy: - Check the entrance door switch (MSW1), delivery door switch (MSW3) and front cover close detection switch (MSW101). - Replace the entrance door switch (MSW1), delivery door switch (MSW3) and front cover close detection switch (MSW101).

Code: E5F9-8002

Description: Saddle switch error
When the delivery door switch is in the open status even when all the covers are closed
Remedy: - Check the entrance door switch (MSW1), delivery door switch (MSW3) and front cover close detection switch (MSW101). - Replace the entrance door switch (MSW1), delivery door switch (MSW3) and front cover close detection switch (MSW101).

Code: E5F9-8003

Description: Saddle switch error
When the front cover close detection door switch is in the open status even when all the covers are closed
Remedy: - Check the entrance door switch (MSW1), delivery door switch (MSW3) and front cover close detection switch (MSW101). - Replace the entrance door switch (MSW1), delivery door switch (MSW3) and front cover close detection switch (MSW101).

Code: E602

Description: Hard disk trouble
Remedy:

Code: E604

Description: Defective or insufficient image memory (SDRAM)
Remedy: Increase the amount of the SDRAM memory.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie