• Code: E202-0001
• Description: 1st mirror stand HP detection trouble
  The 1st mirror stand fails to move tTransparency even when it retracts.
• Remedy: Replace the optical system HP sensor, optical system motor and reader controller PCB.

• Code: E202-0002
• Description: 1st mirror stand HP detection trouble
  The 1st mirror stand fails to move from HP even when it advances.
• Remedy: Replace the optical system HP sensor, optical system motor and reader controller PCB.

• Code: E225-0001
• Description: Exposure lamp lighting trouble
  Light quantity of the exposure lamp has dropped.
• Remedy: Clean the white plate. Replace the exposure lamp.

• Code: E227-0001
• Description: Reader unit power supply error
  When the 24 V port is OFF when the power is turned ON.
• Remedy: Disconnect and re-connect the power connector. Replace the power supply

• Code: E227-0002
• Description: Reader unit power supply error
  When the 24 V port is OFF when a job is started.
• Remedy: Disconnect and re-connect the power connector. Replace the power supply

• Code: E227-0003
• Description: Reader unit power supply error
  When the 24 V port is OFF when a job is finished.
• Remedy: Disconnect and re-connect the power connector. Replace the power supply

• Code: E227-0004
• Description: Reader unit power supply error
  When the 24 V port is OFF during load drive.
• Remedy: Disconnect and re-connect the power connector. Replace the power supply

• Code: E240-0000
• Description: Error in communication between main controller and DC controller
  Serial communication error
• Remedy: Check the connector connections. Check the DC controller PCB (MAISY). Replace the No.1 main controller circuit.