• Code: 1118
• Description: Door Open Jam1
• Causes: Registration sensor/Multi-purpose Tray Paper Sensor/Cassette Feed Sensor
• Remedy: SR1/SR6/SR31 Cassette1/Multi-purpose Tray/Cassette2

• Code: 1158
• Description: Door Open Jam1
• Causes: Registration sensor/Fixing Delivery Sensor/Delivery Sensor/Duplex Re-pickup Sensor
• Remedy: SR1/SR3/SR4/SR22 Registration Area to Delivery Area

• Code: 1198
• Description: Door Open Jam1
• Causes: Registration sensor/Fixing Delivery Sensor/Delivery Sensor/Duplex Re-pickup Sensor
• Remedy: SR1/SR3/SR4/SR22 Duplex Re-pickup Assembly

• Code: 11D8
• Description: Door Open Jam1
• Causes: Registration sensor/Fixing Delivery Sensor/Delivery Sensor/Duplex Re-pickup Sensor
• Remedy: SR1/SR3/SR4/SR22 Registration Area to Delivery Area Duplex Re-pickup Assembly

• Code: E000-0000
• Description: Error in temperature rising of Fixing Assembly
• Causes: Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
• Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E001-0000
• Description: Abnormal high temperature of Fixing Assembly
• Causes: It was detected that the temperature of the Fixing Assembly was abnormally high.
• Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E001-0001
• Description: Abnormal high temperature of Fixing Assembly
• Causes: It was detected that the temperature of the Fixing Assembly (Sub Thermistor) was abnormally high.
• Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E003-0000
• Description: Abnormal low temperature of Fixing Assembly
• Causes: It was detected that the temperature of the Fixing Assembly was abnormally low.
• Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.