Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon D1550 — Trang 8/8

Code: E736-0000

Description: Communication error with CCU/modem
Causes: Communication error with CCU/modem, NCU PCB type error
Remedy: 1. Install the set of the controller firmware. 2. Replace the NCU PCB. 3. Replace the Main Controller PCB.

Code: E736-0001

Description: Error in ROM for backing up fax data
Causes: An error occurred in ROM for backing up fax data
Remedy: 1. Install the set of the controller firmware. 2. Replace the NCU PCB. 3. Replace the Main Controller PCB.

Code: E744-4000

Description: Engine ID error
Causes: Invalid engine connection was detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the Engine Controller PCB. 3. Install the Engine Controller PCB. 4. Install the set of the controller firmware. 5. Check the model code. (When the model code and the engine code are mismatched, E744-4000 occurs.)

Code: E744-5000

Description: Error in the Control Panel PCB
Causes: Error in the Control Panel PCB (microcomputer)
Remedy: 1. Check the Control Panel PCB, and install the firmware (PANEL). 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB.

Code: E744-6000

Description: Communication error with Wireless LAN PCB
Causes: Communication with the Wireless LAN PCB could not be established.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Wireless LAN PCB. 3. Install the set of the controller firmware. 4. Replace the Wireless LAN PCB. 5. Replace the Main Controller PCB.

Code: E804-0004

Description: Controller Fan error
Causes: Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
Remedy: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.

Code: E805-0000

Description: Main Fan error
Causes: The Main Fan was locked for a specified consecutive period of time.
Remedy: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.

Code: E808-0000

Description: Low-voltage power supply failure detection
Causes: Printer detected low-voltage power supply failure.
Remedy: 1. Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie