Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon imageCLASS 3240

Code: E000

Description: The thermistor has an open circuit or a short circuit.
The heater has an open circuit.
The thermal fuse has blown.
The High-voltage power supply board has a fault.
The DCNT board has a fault.
Remedy: - Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the High-voltage power supply board.
- Replace the DCNT board.

Code: E100

Description: The scanner assembly has a fault.
Remedy: - Check the connector of the laser scanner assembly.
- Replace the laser scanner assembly.
- Replace the engine controller PCB.

Code: E198

Description: Flash ROM write error.
Remedy: - Turn the power OFF and then back ON.
- Replace the SCNT board.

Code: E225

Description: CIS lamp has a fault.
Remedy: - Turn the power OFF and then back ON.
- Replase the CIS unit.

Code: E674

Description: Modem error.
Remedy: - Turn the power OFF and then back ON.
- Replace the SCNT board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie