• Code: E003-0
• Description: Abnormally low temperature (detected by main thermistor)
  -After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
• Remedy: - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the Engine controller PCB.

• Code: E003-1
• Description: Abnormally low temperature (detected by sub thermistor)
  - After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation.
• Remedy: - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the Engine controller PCB

• Code: E010-0
• Description: Main motor failure
  - The main motor is faulty.
• Remedy: - Check the connector of the main motor. - Replace the main motor. - Replace the Engine controller PCB.

• Code: E100-0
• Description: BD detection PCB failure
  - The BD detection PCB is faulty.
• Remedy: - Replace the laser scanner unit. - Replace the Engine controller PCB.

• Code: E196-1
• Description: Flash ROM write/read error
  - The write/read of Flash ROM in the Main Controller Board is faulty.
• Remedy: - Replace the Main Controller Board.

• Code: E196-2
• Description: PCL ROM write/read error
  - The write/read of PCL ROM in the Main Controller Board is faulty.
• Remedy: - Replace the Main Controller Board.

• Code: E197-0
• Description: Printer engine communication error
  - Erroneous communication between the Engine controller PCB and Main Controller Board was detected.
• Remedy: - Check the connectors of the Engine controller PCB and Main Controller Board. - Replace the Engine controller PCB for normal connection. - Replace the Main Controller Board.

• Code: E716-0
• Description: Erroneous communication with optional cassette
  - Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.
• Remedy: - Check the connectors of the optional cassette PCB and Engine controller PCB. - Replace the optional cassette PCB for normal connection. - Replace the Engine controller PCB