• Code: E000-0000
• Description: Error in temperature rising of Fixing Assembly
  Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
• Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E001-0000
• Description: Abnormal high temperature of Fixing Assembly
  It was detected that the temperature of the Fixing Assembly was abnormally high.
• Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E003-0000
• Description: Abnormal low temperature of Fixing Assembly
  It was detected that the temperature of the Fixing Assembly was abnormally low.
• Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

• Code: E004-0000
• Description: Error in fixing power supply drive circuit
  Failed to detect the zero cross signal for the specified period of time or more.
• Remedy: 1. Check the connection of connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

• Code: E014-0000
• Description: Error in startup of the Main Motor
  Revolution of the Main Motor did not reach the specified value.
• Remedy: 1. Check the connection of connector between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB.

• Code: E100-0000
• Description: Laser Scanner Assembly error
  At the Laser Scanner Unit, BD cycle was not within the specified range.
• Remedy: 1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit

• Code: E196-1000
• Description: Main Controller PCB reading/writing error
  Error in reading/writing of main program in the Main Controller PCB
• Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.

• Code: E196-2000
• Description: Main Controller PCB reading/writing error
  Error in reading/writing of setting values storage area in the Main Controller PCB
• Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.