Mã lỗi Canon imageCLASS LBP253dw — Trang 6/6
Description: Main Controller PCB error
Causes: Microcomputer error
Remedy: Install the firmware according to the model Replace the Main Controller PCB.
Description: System error
Causes: System error
Remedy: Contact the service company office
Description: Firmware error
Causes: An error due to the controller software occurred so that print could not be proceeded.
Remedy: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the downloaded firmware again.
Description: Main Fan error
Causes: Main Fan failure is detected.
Remedy: 1. Check the Main Fan or the connector. 2. Replace the Main Fan 3. Replace the Main Controller PCB.