Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon imageCLASS LBP351dn — Trang 2/11

Code: E001-0000

Description: Abnormally high fixing temperature 1
Causes: The Main Thermistor detected a temperature higher than the specified temperature.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E001-0001

Description: Abnormally high fixing temperature 2
Causes: The Sub Thermistor detected a temperature higher than the specified temperature.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E003-0000

Description: Abnormally low fixing temperature detection 1
Causes: Temperature of the Main Thermistor was lower than the specified temperature when the heater was ON.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E003-0001

Description: Abnormally low fixing temperature detection 2
Causes: Temperature of the Sub Thermistor 1 was lower than the specified temperature when the heater was ON.
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Replace the Fixing Assembly. 3. Replace the Power Supply PCB.

Code: E004-0000

Description: Fixing Drive Assembly circuit error
Causes: Error in either the Fixing Heater or the Fixing Motor
Remedy: 1. Check the drawer connector between the Fixing Assembly and the Power Supply PCB. 2. Check the connection of the Fixing Motor. 3. Replace the Fixing Assembly. 4. Replace the Fixing Motor. 5. Replace the Power Supply PCB.

Code: E004-0004

Description: Mismatch of Fixing Assembly type
Causes: A fixing assembly of another product was installed.
Remedy: Replace the fixing assembly with that of this product.

Code: E012-0000

Description: Pickup Motor error
Causes: Pickup Motor error (startup error)
Remedy: 1. Check the connector between the Pickup Motor and the DC Controller PCB. 2. Replace the Pickup Motor. 3. Replace the DC Controller PCB. 4. Replace the Pickup Drive Unit.

Code: E012-0001

Description: Pickup Motor error
Causes: Pickup Motor error (rotation error)
Remedy: 1. Check the connector between the Pickup Motor and the DC Controller PCB. 2. Replace the Pickup Motor. 3. Replace the DC Controller PCB. 4. Replace the Pickup Drive Unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie