Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon imageCLASS LBP7200Cdn — Trang 4/4

Code: E196-0001

Description: Error in DCON ROM. Failure in ROM update of DC controller PCB
Causes: Can not access to DC controller NVRAM Cause Failure in DC controller PCB
Remedy: - Replace the DC controller PCB

Code: E197-0001

Description: Engine communication error
Causes: Error between DC controller PCB and main controller PCB. Cause Failure in connection between PCB, failure in DC controller PCB, failure in controller PCB.
Remedy: - Check the connection of the connector of the DC controller PCB and controller PCB - Replace the DC controller PCB - Replace the controller PCB

Code: E198

Description: Breakdown in DC controller memory
Causes: Breakdown in DC controller memory Cause Failure in DC controller PCB
Remedy: - Replace the DC controller PCB

Code: E747

Description: EEPROM error
Causes: Failure in main controller PCB
Remedy: - Replace the main controller PCB

Code: E805-0005

Description: Error in duplex cooling fan
Causes: Duplex cooling fan can not rotate the specified number of rotations. Cause Failure in duplex cooling fan, failure in DC controller PCB
Remedy: - Check the connectors of duplex cooling fan and DC controller PCB - Replace the duplex cooling fan

Code: E806

Description: Error in power supply cooling fan
Causes: Power cooling fan can not rotate the specified number of rotations. Cause Failure in power supply cooling fan, failure in DC controller PCB
Remedy: - Check the connectors of power supply cooling fan and DC controller PCB - Replace the power cooling fan

Code: E808

Description: Error in low voltage power supply.
Causes: If printer detects a breakdown in low voltage power supply. Cause Breakdown in low pressure power supply, failure in DC controller PCB
Remedy: - Check the connectors of power unit and DC controller PCB - Replace the power unit

Code: E840

Description: Error in pressure release system.
Causes: Control home position (in pressured condition) cannot function after the home position control is started. Cause Failure in fixing drive assembly, failure in fixing pressure release cam.
Remedy: - Replace the fixing drive assembly - Replace the fixing pressure release cam
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie