Mã lỗi Canon imageCLASS LBP7780Cx — Trang 10/12
Description: Model code mismatch
Causes: Model code mismatch
Remedy: Change to proper bootable.
Description: Model code mismatch
Causes: Mismatch of the series or model of the firmware sent at the time of downloading
Remedy: Check the supported series or model of the firmware, and burn the correct series or model of firmware.
Description: Model code mismatch
Causes: Detection of falsification of the Controller Board
Remedy: - Turn OFF and then ON the power. - Replace the Main Controller PCB.
Description: Error in Main Controller
Causes: Failed to rewrite due to no more alternative block of Flash ROM (NAND) available.
Remedy: -Replace the Main Controller PCB.
Description: Error in Main Controller
Causes: Timeout of G-Chip loop back
Remedy: Replace the main controller PCB.
Description: Error in Main Controller
Causes: Unknown device detected on the PCI
Remedy: Replace the main controller PCB.
Description: CPU Processing Error
Causes: CPU exception occurred.
Remedy: Turn on the power again.
Description: Fan failure
Causes: Power supply fan failure
Remedy: • Check the connection of the connector. • Replace the fan. • Check the harness (check for disconnected/pinched harness)