Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon imageCLASS MF212w — Trang 2/4

Code: 0018H

Description: Printer Jam Code.
Door Open Jam
Remedy:

Code: 001CH

Description: Printer Jam Code.
Wrap Jam
Remedy:

Code: 0020H

Description: Reversal Delay Jam
Remedy:

Code: 0021H

Description: Reversal Stationary Jam
Remedy:

Code: 0071H

Description: Scanner Jam Code.
Timing error
Remedy:

Code: 0094H

Description: Scanner Jam Code.
Initial Stationary
Remedy:

Code: 0095H

Description: Scanner Jam Code.
Pickup NG
Remedy:

Code: E000-0000

Description: Fixing Assembly does not start up within specified time.
Remedy: When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check that the heater resistance measured between 1PIN and 2PIN of the cable (J101) on the DC Controller Board is in the following range. Replace the Fixing Assembly when the resistance value is abnormal. [1] 120 V machine - Heater resistance: 16.0 U ±7% [2] 230 V machines - Heater resistance: 53.8 U ±7% (2) Check the connection of connector (J101) on the DC Controller Board. (3) Check the connection of connector (J552) on DC Controller Board. (4) Replace the Fixing Assembly. (5) Replace the DC Controller Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie