Remedy: 1) Turn the power off and on. 2) Make sure that the fixing unit and ECNT board (J505) are properly connected. 3) Make sure that the fixing unit and power supply board (CN2) are properly connected. 4) Make sure connections of the boards (power supply board (CN101), ECNT board (J501, J502)). 5) Replace the fixing unit.
Remedy: 1) Turn the power off and on. 2) Make sure that the Laser/Scanner unit (J801) and ECNT board (J503) are properly connected. 3) Make sure that the Laser/Scanner unit and ECNT board (J504) are properly connected. 4) Make sure connections of the boards (power supply board (CN101), ECNT board (J501, J502)). 5) Replace the Laser/Scanner unit.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.