• Code: E000
• Description: The thermistor has an open circuit or a short circuit.
  The heater has an open circuit.
  The thermal fuse has blown.
  The High-voltage power supply board has a fault.
  The DCNT board has a fault.
• Remedy: - Check the connector of the fixing film unit.
  - Replace the fixing film unit.
  - Replace the High-voltage power supply board.
  - Replace the DCNT board.

• Code: E100
• Description: The scanner assembly has a fault.
• Remedy: - Check the connector of the laser scanner assembly.
  - Replace the laser scanner assembly.
  - Replace the engine controller PCB.

• Code: E198
• Description: Flash ROM write error.
• Remedy: - Turn the power OFF and then back ON.
  - Replace the SCNT board.

• Code: E225
• Description: CIS lamp has a fault.
• Remedy: - Turn the power OFF and then back ON.
  - Replase the CIS unit.

• Code: E674
• Description: Modem error.
• Remedy: - Turn the power OFF and then back ON.
  - Replace the SCNT board.