Mã lỗi Canon imageCLASS MF515dw — Trang 9/12
Code:
Tất cả lỗi (91)
0001
0002
0004
0005
0071
0094
0104
0105
0106
010C
010D
0144
0145
0146
014C
014D
0184
0185
0186
018C
018D
01C4
01C5
01C6
01CC
01CD
0208
0210
021C
0224
0248
0250
025C
0264
0288
0290
029C
02A4
02C8
02D0
02DC
02E4
1014
1015
1054
1055
1094
1095
10D4
10D5
1118
1158
1198
11D8
E000-0000
E001-0000
E001-0001
E003-0000
E003-0001
E004-0000
E012-0000
E012-0001
E014-0000
E014-0001
E052-0000
E100-0000
E110-0000
E196-0000
E196-2000
E196-3000
E196-3001
E202-0001
E202-0002
E246-0000
E247-0000
E302-0001
E350-0000
E354-0000
E355-0000
E355-0004
E355-0005
E719-0000
E732-0000
E733-0000
E736-0001
E744-4000
E744-5000
E744-6000
E805-0005
E806-0000
E808-0000
Description: Duplex Feed Unit absent error
Causes: Connection of the Duplex Feed Unit was not correct.
Remedy: 1. Reinstall the Duplex Feed Unit.
Description: Laser Scanner Assembly error
Causes: BD cycle of the Laser Scanner Unit was not within the specified range.
Remedy: 1. Check the connector connection between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connector connection between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit.
Description: Laser Scanner Assembly error
Causes: An error in the initial operation of the Scanner Motor in the Laser Scanner Unit was detected.
Remedy: 1. Check the connector connection between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connector connection between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit.
Description: DCON error
Causes: Update of the DCON was failed. (RFU mode right after the startup)
Remedy: 1. Replace the Engine Controller PCB.
Description: Main Controller PCB writing/reading error
Causes: Error in writing/reading of the setting values storage area in the Main Controller PCB
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.
Description: ROM writing/reading error (eMMC)
Causes: An error occurred when writing/reading data to/ from the ROM.
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.
Description: ROM-ID mismatch (eMMC)
Causes: An error occurred when writing/reading data to/ from the ROM.
Remedy: 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB.
Description: CIS Unit HP error (outward)
Causes: The CIS Unit did not move to HP even it moved backward. Reader HP Sensor error, Reader Motor error, CIS Unit error
Remedy: 1. Replace the Reader HP Sensor. 2. Replace the Reader Motor. 3. Replace the CIS Unit. 4. Replace the Reader Unit.