Mã lỗi Canon imageCLASS MF5980dw — Trang 8/8
Description: Firmware error
An error due to the controller software occurred so that print could not be proceeded.
Remedy: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the installed engine again.
Description: Controller Fan error
Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
Remedy: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.
Description: Main Fan error
The Main Fan was locked for a specified consecutive period of time.
Remedy: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.
Description: Failure detection of Low Voltage Power Supply PCB
Printer detected failure of the Low Voltage Power Supply PCB.
Remedy: Replace the Engine Controller PCB.