Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF6000S — Trang 14/39

Code: 2830

Display: Left printhead error. Open top cover and replace the left printhead.
Description: Printhead error detected (L head only). Displayed when restarting after detection of error 282D to prompt you to replace printhead L.
Remedy: Replace the printhead L.

Code: 2832

Display: Hardware error 03130031-2832 Turn off printer, wait, then turn on again.
Description: VHT leak detection error of right printhead or of a single printhead, in case of VHT exceeds rated value or falls below the rated value.
Remedy: iPF6300/6400 Series iPF8300/8400/9400 Series Replace right or left printhead.

Code: 2833

Display: Hardware error 03130031-2833 Turn off printer, wait, then turn on again.
Description: VHT leak detection error of left printhead, in case of VHT exceeds rated value or falls below the rated value.
Remedy: iPF6300/6400 Series iPF8300/8400/9400 Series Replace right or left printhead.

Code: 2834

Display: Unknown printhead. Open top cover and re-install printhead.
Description: Printhead contact failure is detected after the printhead installation.
Remedy: 1. Remove and reinstall the printhead. 2. Replace the printhead. 3. Replace the carriage unit. 4. Replace the main controller PCB.

Code: 2835

Display: Cannot recognize print head R. Open the top cover and reinsert the printhead R.
Description: Printhead contact failure is detected after the printhead installation.
Remedy: 1. Remove and reinstall the printhead. 2. Replace the printhead. 3. Replace the carriage unit. 4. Replace the main controller PCB.

Code: 2836

Display: Cannot recognize print head L. Open the top cover and reinsert the printhead L.
Description: Printhead contact failure is detected after the printhead installation.
Remedy: 1. Remove and reinstall the printhead. 2. Replace the printhead. 3. Replace the carriage unit. 4. Replace the main controller PCB.

Code: 2901

Display: Mail box nearly full. Delete unwanted data. The mail box is nearly full. Delete
Description: The available size of the permanent area of the hard disk space has fallen to less than 1 GB.
Remedy: Reorganize data.

Code: 2902

Display: Mail box full. Now printing without saving data.
Description: The hard disk has run out of free space, disabling copy printing or error recovery.
Remedy: Reorganize data.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie