Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF610 — Trang 4/6

Code: E196-4042

Description: Flash write error Failed to write flash ROM on execution of the firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB

Code: E196-4043

Description: Firmware update failure error Failed to allocate a work area on RAM on firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: E196-4044

Description: EEPROM size error Size information about the firmware data transmitted on firmware update and the size of actually transmitted data do not match.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Check the firmware transfer environment (IF changes, PC). 4. Replace the main controller PCB.

Code: E196-4045

Description: Engine EEPROM write error An EEPROM read/write failure has been detected in the engine portion of the firmware.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: E196-404C

Description: Serial number information mismatch A mismatch has been detected between the serial number information stored in the EEPROM on the main controller PCB and that stored in the EEPROM on the MTC relay PCB at startup.
Remedy: 1. Check to see if the correct PCB is mounted, since a PCB of the wrong model may have been mistakenly mounted during servicing. 2. Invoke service mode to implement PCB replacement.

Code: E196-404D

Description: Machine ID information mismatch A mismatch has been detected between the model ID information stored in the EEPROM on the main controller PCB and that stored in the EEPROM on the MTC relay PCB at startup.
Remedy: 1. Check to see if the correct PCB is mounted, since a PCB of the wrong model may have been mistakenly mounted during servicing. 2. Invoke service mode to implement PCB replacement.

Code: E196-404E

Description: An EEPROM read/ write error has been detected in the controller portion of the firmware.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Start in service mode to clear the error. 3. Replace the main controller PCB.

Code: E198-401C

Description: Faulty RTC Any error other than the two errors mentioned below has been detected while initializing the RTC at startup.
Remedy: 1. Restart the printer in service mode. 2. Replace the main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie