• Code: 1048
• Display: GL2: W0904 The memory is full.
• Description: HP/GL2 error; polygon buffer overflow The size of drawing data exceeds the processing capacity.
• Remedy: 1. Reduce the size of rendering data. 2. Replace with HP RTL data for manipulation with On The Fly*. *: On The Fly: The method to transmit data in sequence from paper. The software that generates HP-GL/2 data has this option to specify. Select this option to save the memory usage of the printer.

• Code: 1049
• Display: Before borderless printing, move the blue platen switch.
• Description: When print data with borderless printing specification has been received, platen shutter was closed.
• Remedy: Open the platen shutter.

• Code: 1050
• Display: Blue platen switch is dirty. Please clean the switch.
• Description: Cleaning of platen shutter is necessary. When reading the platen shutter in multisensor, borderless printing data has been received in unstable output condition.
• Remedy: Clean the platen shutter.

• Code: 1051
• Display: Paper Too Small
• Description: Paper mismatch (size) Size clip warning With [Warning Indication] selected for [Paper Mismatch Detection] in the menu settings, the size of paper loaded is smaller than that of specified from driver.
• Remedy: Continued printing allowed. Check driver settings. Replace with appropriate paper.

• Code: 1052
• Display: Borderless printng not possible. Check supported paper.
• Description: Borderless printing not available (unsupported size) With [Warning Indication] selected for [Paper Mismatch Detection] in the menu settings, borderless printing data is received, but roll paper not supporting borderless printing has been loaded.
• Remedy: Replace with appropriate paper.

• Code: 1053
• Display: Paper position not suitable for borderless printing.
• Description: Borderless printing not available (physical) With [Warning Indication] selected for [Paper Mismatch Detection] in the menu settings, borderless printing data is received, but roll paper loaded is more than 1mm off the predefined position for the pre-ejection opening at the counter-HP side.
• Remedy: Reload/ replace the roll paper.

• Code: 1054
• Display: PaprWidth Mismatch
• Description: Paper mismatch (size) With [Warning Indication] selected for [Paper Mismatch Detection] in the menu settings, the width of roll paper loaded and that of specified by data do not match.
• Remedy: Continued printing allowed. Check driver settings. Replace with appropriate paper.

• Code: 1056 ... 1062
• Display: Move the blue platen switch No.XX to the right.
• Description: The multisensor detected that the platen shutter used for pre-ejection was closed. Detection timing: -At paper loading -At start of first printing (after upper cover is opened and closed, or recovery from sleep mode, or the power is turned on with paper loaded) The following list shows the last 2 digits of error codes and the corresponding messages. 56:No.2, 57:No.3, 58:No.459:No.5, 5A:No.6, 5B:No.75C:No.8, 5D:No.9, 5E:No.105F:No.11, 60:No.12, 61:No.13, 62:No.14
• Remedy: Move the platen shutter relevant to the message to the right, to open it.