Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF6200 — Trang 30/39

Code: 2F53

Display: Hardware error. 03130031-2F53. Turn off printer,wait, then turn on again.
Description: Supply valve motor error of the left ink tank. Drove supply valve motor. The movement was not detected.
Remedy: iPF8400/9400 Series 1. Replace the left ink tank unit. 2. Replace the main controller PCB.

Code: 2F54

Display: Hardware error. 03130031-2F54. Turn off printer,wait, then turn on again.
Description: Supply valve motor error of the right ink tank. Drove supply valve motor. The movement was not detected.
Remedy: iPF8400/9400 Series 1. Replace the right ink tank unit. 2. Replace the main controller PCB.

Code: 2F60

Display: Spectrophotometer Unit not connected. Turn off power and attach Spectrophotometer Unit.
Description: Spectrophotometer unit won't return signals.
Remedy: 1. Install spectrophotometer unit. 2. Replace signal line. 3. Replace connection. 4. Replace spectrophotometer unit PCB.

Code: 2F61

Display: Hardware error 038A0002-2F61 Turn off printer, wait a while, then turn it on again.
Description: UART communication error. (Data transfer volume in consistency, checksum error etc.)
Remedy: 1. Replace signal line. 2. Replace connection. 3. Replace spectrophotometer unit PCB

Code: 2F62

Display: Hardware error 038A0002-2F62 Turn off printer, wait a while, then turn it on again.
Description: When transmitting specified pulses to spectrophotometer carriage motor, the spectrophotometer carriage unit won't respond to spectrophotometer carriage HP sensor.
Remedy: 1. Replace spectrophotometer unit PCB. 2. Replace lines around spectrophotometer carriage unit. 3. Replace spectrophotometer carriage motor.

Code: 2F63

Display: Hardware error 038A0002-2F63 Turn off printer, wait a while, then turn it on again.
Description: The spectrophotometer up-down unit upper detection sensor won't respond when a predefined pulse is sent to the spectrophotometer up-down unit motor.
Remedy: 1. Replace spectrophotometer updown unit motor. 2. Replace spectrophotometer updown unit upper detection sensor. 3. Re-install delivery guide. 4. Replace the spectrophotometer unit PCB.

Code: 2F65

Display: Hardware error 038A0002-2F65 Turn off printer, wait a while, then turn it on again.
Description: When a predefined pulse is sent to the spectrophotometer up-down unit motor, the spectrophotometer up-down unit lower detection sensor in spectrophotometer unit won't respond.
Remedy: 1. Replace spectrophotometer updown unit motor. 2. Replace spectrophotometer updown unit lower detection sensor. 3. Re-install delivery guide. 4. Replace the spectrophotometer unit PCB.

Code: 2F66

Display: Hardware error 038A0002-2F66 Turn off printer, wait a while, then turn it on again.
Description: Media dry fan won't return signals.
Remedy: 1. Replace fan 2. Replace signal lines 3. Replace the spectrophotometer unit PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie