• Code: 1021
• Display: Papr Type Mismatch
• Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
• Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.

• Code: 1022
• Display: Papr Type Mismatch
• Description: Paper mismatch (type) With [Warning Indication] is selected for [Paper Mismatch Detection], the type of loaded paper mismatches the specified type. Or, with [Pause] is selected for [Paper Mismatch Detection], the [Online] button was pressed to execute forced printing.
• Remedy: Continued printing is allowed. Check driver setting. Replace with appropriate paper.

• Code: 1030
• Display: GARO W1221
• Description: (Image mode)Unknown command A character that is located within bounds of a group character or end parameter character but that is not defined as a command has been detected during Image mode command decoding.
• Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

• Code: 1031
• Display: GARO W1222
• Description: (Image mode) Invalid parameter count (no parameters) A numeric field has not been identified as being numeric during Image mode command decoding.
• Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

• Code: 1032
• Display: GARO W1223
• Description: (Image mode) Required item missing A character out of bounds has been detected where a group or end parameter character ought to exist, during Image mode command decoding.
• Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

• Code: 1034
• Display: GARO W1225
• Description: (Image mode)Other warning A character other than <ESC> has been detected right after the image mode analysis module entered Image mode or when the decoding of a single command ended.
• Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

• Code: 1035
• Display: GARO W1231
• Description: (Setup mode)Unknown command A command character string other than RESET, SET, OPCMT0 and OPCMT2 has been detected in a PJL command.
• Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).

• Code: 1036
• Display: GARO W1232
• Description: (Setup mode)Invalid parameter count Too many or too few parameters have been detected during Setup mode command decoding.
• Remedy: 1. Identify the model. 2. If the error has occurred with RIP, try with the printer driver. 3. Try in an alternative environment (I/ F, PC).