Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF6400SE — Trang 32/39

Code: 2F72

Display: Hardware error. 03130031-2F72. Turn off printer, wait, then turn on again.
Description: Indication at ink priming error in the right subtank.
Remedy: For iPF6400 Series, 1. Replace the right subtank 2. Replace the main controller PCB.

Code: 2F80

Display: Spectrophotometer sensor is not mounted. Please check if the sensor is mounted properly and press OK.
Description: Spectrophotometer sensor won't return signals.
Remedy: 1. Install Spectrophotometer sensor. 2. Check cables. 3. Replace spectrophotometer sensor. 4. Replace the spectrophotometer unit PCB.

Code: 2F81

Display: Spectrophotometer Unit Calibration white tile error. Clean the tile then mount it and press OK.
Description: After white calibration, the spectrophotometer sensor returned a value other than predetermined value.
Remedy: 1. Clean white tile. 2. Mount white tile. 3. Replace spectrophotometer sensor.

Code: 2F82

Display: Delivery guide of SP unit is not mounted. Check if the guide is mounted properly and press OK.
Description: While the spectrophotometer up-down unit upper detection sensor and spectrophotometer top cover open/closed detection sensor are detecting, the interlock switch remains OFF.
Remedy: 1. Mount delivery guide. 2. Replace the spectrophotometer unit PCB. 3. Replace spectrophotometer updown unit upper detection sensor.

Code: 2F83

Display: Backing plate error in the spectrophotometer unit. Clean the backing plate. Install the backing plate to the unit. Then press [OK].
Description: No signal retuned from backing plate. The signal from the backing plate is beyond threshold.
Remedy: 1. Clean the backing plate. 2. Replace the spectrophotometer unit PCB. 3. Replace the spectrophotometer sensor.

Code: 2F85

Display: SP unit up and down cover is open. Close it and press OK
Description: Spectrophotometer top cover open/closed detection sensor won't respond.
Remedy: 1. Close spectrophotometer top cover. 2. Replace spectrophotometer top cover open/closed detection sensor. 3. Replace the spectrophotometer unit PCB.

Code: 2F86

Display: SP unit cover is open. Close it and then press OK.
Description: Spectrophotometer cover open/closed detection sensorwon't respond.
Remedy: 1. Close spectrophotometer cover. 2. Replace cover sensor. 3. Replace the spectrophotometer unit PCB.

Code: 2F87

Display: Colorimetric readout error. Please press OK and execute color measuring again.
Description: When executing color measuring, the spectrophotometer sensor returned a value other than predetermined value was returned.
Remedy: 1. Operate paper feed adjustment. 2. Change the patch size to large. 3. Printer support (In case of printing failure). 4. Replace spectrophotometer sensor
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie