Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF650 — Trang 2/6

Code: E141-4046

Description: Recovery part revolutions reaching 50,000 cycles or more Recovery part operations have reached a predetermined count.
Remedy: Check the parts counter and replace required parts. (Replacement of the parts coming to the end of their useful lives is recommended.) Initialize the counter for the replacement unit mounted. The iPF5000/500/600 have a counter problem fixed. Identify the firmware version and start in download mode to upgrade the firmware to Ver.1.13 or later from any earlier release.

Code: E144-4047

Description: Carriage count error Supply part operations have reached a predetermined count.
Remedy: Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement.

Code: E144-4048

Description: Non-discharging nozzles on initial filling An unallowable number of nondischarging nozzles have been detected at the completion of initial filling.
Remedy:

Code: E144-404F

Description: Pump revolutions full The number of HP pre-ejection pump revolution has reached the defined value.
Remedy: Clear the counter in service mode after having replaced the HP pre-ejection tray unit.

Code: E146-4001

Description: Borderless/flow pre-ejection/mist recovery count full
Remedy: Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement.

Code: E161-403E

Description: Head abnormal temperature rise (printhead 1 (R), or A model) Either of the two Di sensors maintained for each printhead chip (color-specific) has been detected at 120 degrees C or higher or -10 degrees C or lower.
Remedy:

Code: E161-403F

Description: Head abnormal temperature rise (printhead 2 (L)) Either of the two Di sensors maintained for each printhead chip (color-specific) has been detected at 120 degrees C or higher or -10 degrees C or lower.
Remedy:

Code: E161-4050

Description: Non-ejection detection error The timing of "ink priming sequence" is fallowing. -At installation of a new model printer -At reinstallation after the second transportation. -At replacement of the printhead
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie