Code :

Code: 4041
Display: ERROR E196-4041 Call for service.
Description: Flash erase error Failed to erase flash ROM on execution of the firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: 4042
Display: ERROR E196-4042 Call for service.
Description: Flash write error Failed to write flash ROM on execution of the firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: 4042
Display: Unknown file. Check file format. Turn off printer, wait a while, then turn it on again.
Description: MIT data transfer failure Failed to write MIT data on its transmission.
Remedy: 1. Execute "Initialize Paper Type" from the system settings. (Note: All paper information will be reset to its factory defaults and additional Paper deleted.) 2. Upgrade the firmware in download mode. 3. Replace the main controller PCB.

Code: 4043
Display: ERROR E196-4043 Call for service.
Description: Firmware update failure error Failed to allocate a work area on RAM on firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: 4044
Display: ERROR E196-4044 Call for service.
Description: EEPROM size error Size information about the firmware data transmitted on firmware update and the size of actually transmitted data do not match.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Check the firmware transfer environment (IF changes, PC). 4. Replace the main controller PCB.

Code: 4045
Display: ERROR E196-4045 Call for service.
Description: Engine EEPROM write error An EEPROM read/write failure has been detected in the engine portion of the firmware.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: 4046
Display: ERROR E141-4046 Call for service.
Description: Recovery part revolutions reaching 50,000 cycles or more Recovery part operations have reached a predetermined count.
Remedy: Check the parts counter and replace required parts. (Replacement of the parts coming to the end of their useful lives is recommended.) Initialize the counter for the replacement unit mounted. The iPF5000/500/600 have a counter problem fixed. Identify the firmware version and start in download mode to upgrade the firmware to Ver.1.13 or later from any earlier release.

Code: 4047
Display: ERROR E144-4047 Call for service.
Description: Carriage count error Supply part operations have reached a predetermined count.
Remedy: Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement.