Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF8000 — Trang 13/39

Code: 2824

Display: Cannot adjust optic axis. Press Online to clear the error.
Description: Optical axis unadjustable (which does not occur when in User mode) An adjustment pattern has not been printed. The optical axis deviates from the correct position by -/+3 mm or more.
Remedy: Check the paper (paper type check).

Code: 2825

Display: This type of media is not compatible with HP-GL/2.
Description: Paper type not compatible with HP-GL/2 has been specified.
Remedy: Check the paper.

Code: 2826

Display: LFNG XXX XXX XXX XXX press OK key (XXXX is a measured value.)
Description: When executing LF unevenness auto diagnostic processing, the multisensor read value has gone outside the predefined scope (Service mode only).
Remedy: Check the paper. Check the multisensor.

Code: 2827, 2828, 2829

Display: Execute printhead cleaning. If this message is still displayed, replace Printhead.
Description: Printhead non-discharge error (Replace printhead/ continued printing not allowed) At start of printing the number of nonejecting nozzles is more than 320 per color (1 chip). 2827: Both L and R, or single printhead model 2828: R printhead 2829: L printhead * For the detailed head non-ejection errors, see section 280C. (If Setting of SERVICE MODE > SETTING >HEAD WARNING is off, the error code is 280E.)
Remedy: 1. Execute cleaning. 2. Replace printhead.

Code: 282A

Display: CR MOTOR TUNING ERROR :PRESS OK
Description: Carriage motor identification processing (rotation adjustment) failed (for Service mode)
Remedy: Error is cleared by OK button. 1. Check installation of carriage or carriage belt. 2. Clean the carriage main rail (Do not oil it.) 3. Replace the carriage motor.

Code: 282B

Display: CR VIBRATION ERROR :PRESS OK
Description: When processing carriage motor identification (rotation adjustment), carriage vibration has been detected (for Service mode).
Remedy: Error is cleared by OK button. 1. Check installation of carriage or carriage belt. 2. Clean the carriage main rail (Do not oil it.) 3. Replace the carriage motor.

Code: 282D

Display: Left printhead error. Turn off printer, wait, then turn on again.
Description: Printhead error detected (L head only). Displayed when an abnormal temperature rise of printhead has been detected to prompt you to restart.
Remedy: After restarting, replace the printhead L.

Code: 282E

Display: Printhead error Turn off printer, wait, then turn on again.
Description: Temperature rising detected by particular ink pre-injection before printing was judged abnormal.
Remedy: 1. Replace the printhead. 2. Replace the main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie