Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iPF825 — Trang 3/6

Code: E173-4037

Description: Linear scale error No signal is available from the carriage encoder when the printhead is driven.
Remedy:

Code: E194-404A

Description: Non-ejection count error A non-ejection part operation counter has reached a specified limit.
Remedy: Check the parts counter and replace the target unit or Refresh Service Kit. Initialize the parts counter for the target unit after the replacement.

Code: E196-4034

Description: Multisensor unit version error A different version of multisensor is installed. This would not occur in an ordinary user environment.
Remedy: Replace the multisensor unit.

Code: E196-4040

Description: Checksum error The checksum of a file transmitted on execution of the firmware update is unmatched.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: E196-4041

Description: Flash erase error Failed to erase flash ROM on execution of the firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: E196-4042

Description: Flash write error Failed to write flash ROM on execution of the firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB

Code: E196-4043

Description: Firmware update failure error Failed to allocate a work area on RAM on firmware update.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Replace the main controller PCB.

Code: E196-4044

Description: EEPROM size error Size information about the firmware data transmitted on firmware update and the size of actually transmitted data do not match.
Remedy: 1. Start in download mode to upgrade the firmware. 2. Restart the printer in service mode to clear the error. 3. Check the firmware transfer environment (IF changes, PC). 4. Replace the main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie