Display: Wrong paper type. Check paper type setting in driver. Online: Print Stop: Stop Printing
Description: Paper mismatch (type) At the start of printing, paper type specified in the job and the type of paper actually loaded do not match, and [Stop] has been selected for [Paper Mismatch Detection].
Remedy: Check the paper that is actually loaded on the printer and the driver paper type setting.
Display: Wrong paper type. Check paper type setting on computer. Online: Print Stop: Stop Printing
Description: Paper mismatch (type) The data type defined in the data and the type of actually loaded paper do not match. Following the transmission of data in the GARO format, all of the following conditions have been met at the start of printing: -The paper type that has been set in the job and the type of actually fed paper do not match. -[Stop] has been selected for [Paper Mismatch Detection].
Remedy: Check the paper that is actually loaded on the printer and the driver paper type setting.
Display: The roll is empty. Load/Eject: Change Paper
Description: No roll paper available (trailing edge of roll paper detected) -Trailing edge of paper has been detected by paper sensor in a roll paper operation. -LF out of synchronization on roll paper. (Detected the spool no longer rotating.)
Remedy: 1. Replace the roll paper. 2. Check paper sensor R (I/O mode). 3. Is the paper fed successfully (under a negative load or any other influence)?
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.