Code :

Code: 2E15
Display: Wrong paper type. Check paper type setting in driver. Online: Print Stop: Stop Printing
Description: Paper mismatch (type) At the start of printing, paper type specified in the job and the type of paper actually loaded do not match, and [Stop] has been selected for [Paper Mismatch Detection].
Remedy: Check the paper that is actually loaded on the printer and the driver paper type setting.

Code: 2E15
Display: Wrong paper feed slot for this paper type. Press Load/Eject and reload the paper.
Description: Paper mismatch (type) A paper type that cannot be fed from the specified feeder slot has been specified.
Remedy: Check the feeder slot/cassette pick-up setting.

Code: 2E16
Display: Wrong paper type. Check paper type setting on computer. Online: Print Stop: Stop Printing
Description: Paper mismatch (type) The data type defined in the data and the type of actually loaded paper do not match. Following the transmission of data in the GARO format, all of the following conditions have been met at the start of printing: -The paper type that has been set in the job and the type of actually fed paper do not match. -[Stop] has been selected for [Paper Mismatch Detection].
Remedy: Check the paper that is actually loaded on the printer and the driver paper type setting.

Code: 2E17
Display: No cassette detected. Check the cassette.
Description: Cassette not installed
Remedy: 1. Check to see if the cassette itself is properly loaded. 2. Check and replace sensor (I/O mode).

Code: 2E1B
Display: The roll is empty. Load/Eject: Change Paper
Description: No roll paper available (trailing edge of roll paper detected) -Trailing edge of paper has been detected by paper sensor in a roll paper operation. -LF out of synchronization on roll paper. (Detected the spool no longer rotating.)
Remedy: 1. Replace the roll paper. 2. Check paper sensor R (I/O mode). 3. Is the paper fed successfully (under a negative load or any other influence)?