Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 400 — Trang 18/20

Code: E804-0000

Description: Power Supply Cooling Fan (FM4) error
When detecting a failure of the Power Supply Cooling Fan (FM4).
Remedy: 1. Check the connector connection between the Power Supply Cooling Fan (FM4) and the AC Driver PCB (PCB4).
2. Replace the Power Supply Cooling Fan (FM4).

Code: E805-0000

Description: Heat Exhaust Fan (Rear) (FM6) error
The lock signal was detected for 5.0 seconds while the Heat Exhaust Fan (Rear) (FM6) was being stopped. *The same status was detected again after executing an error retry.
Remedy: 1. Check the connector connection between the Heat Exhaust Fan (Rear) (FM6) and the DC Controller PCB (PCB1).
2. Replace the Heat Exhaust Fan (Rear) (FM6).
3. Replace the DC Controller PCB (PCB1).

Code: E805-0001

Description: Heat Exhaust Fan (Rear) (FM6) rotation error
The lock signal was not detected for 5.0 seconds while the Heat Exhaust Fan (Rear) (FM6) was being driven.
*The same status was detected again after executing an error retry.
Remedy: 1. Check the connector connection between the Heat Exhaust Fan (Rear) (FM6) and the DC Controller PCB (PCB1).
2. Replace the Heat Exhaust Fan (Rear) (FM6).
3. Replace the DC Controller PCB (PCB1).

Code: E805-0002

Description: Heat Exhaust Fan (Front) (FM5) error
The lock signal was detected for 5.0 seconds while the Heat Exhaust Fan (Front) (FM5) was being stopped. *The same status was detected again after executing an error retry.
Remedy: 1. Check the connector connection between the Heat Exhaust Fan (Front) (FM5) and the DC Controller PCB (PCB1).
2. Replace the Heat Exhaust Fan (Front) (FM5).
3. Replace the DC Controller PCB (PCB1).

Code: E805-0003

Description: Heat Exhaust Fan (Front) (FM5) rotation error
The lock signal was not detected for 5.0 seconds while the Heat Exhaust Fan (Front) (FM5) was being driven. *The same status was detected again after executing an error retry.
Remedy: 1. Check the connector connection between the Heat Exhaust Fan (Front) (FM5) and the DC Controller PCB (PCB1).
2. Replace the Heat Exhaust Fan (Front) (FM5).
3. Replace the DC Controller PCB (PCB1).

Code: E820-0000

Description: Developing Cooling Fan (Front) (FM7) error
The lock signal was detected for 5.0 seconds while the Developing Cooling Fan (Front) (FM7) was being stopped. *The same status was detected again after executing an error retry.
Remedy: 1. Check the connector connection between the Developing Cooling Fan (Front) (FM7) and the DC Controller PCB (PCB1).
2. Replace the Developing Cooling Fan (Front) (FM7).
3. Replace the DC Controller PCB (PCB1).

Code: E820-0001

Description: Developing Cooling Fan (Front) (FM7) rotation error
The lock signal was not detected for 5.0 seconds while the Developing Cooling Fan (Front) (FM7) was being driven. *The same status was detected again after executing an error retry.
Remedy: 1. Check the connector connection between the Developing Cooling Fan (Front) (FM7) and the DC Controller PCB (PCB1).
2. Replace the Developing Cooling Fan (Front) (FM7).
3. Replace the DC Controller PCB (PCB1).

Code: E820-0002

Description: Developing Cooling Fan (Rear) (FM8) error
The lock signal was detected for 5.0 seconds while the Developing Cooling Fan (Rear) (FM8) was being stopped. *The same status was detected again after executing an error retry.
Remedy: 1. Check the connector connection between the Developing Cooling Fan (Rear) (FM8) and the DC Controller PCB (PCB1).
2. Replace the Developing Cooling Fan (Rear) (FM8).
3. Replace the DC Controller PCB (PCB1).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie