• Code: E197-0001
• Description: Error in communication of Laser Driver PCB
  Communication error with image PCB for factory (Serial communication error)
• Remedy: 1. Check the cable. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB (UN2).

• Code: E202-0001
• Description: There is an error in the detection of the CCD home position.
  The attempt to detect the home position fails when the CCD is moved forward.
• Remedy: 1. Disconnect and then connect the flexible cable(Reader Controller PCB (UN4)-Main Controller PCB 2 (UN14)). 2. Replace the flexible cable. 3. Replace the CCD HP sensor (S11). 4. Replace the Polygon Motor (M11). 5. Replace the Reader Controller PCB (UN4). 6. Replace the Main Controller PCB 2 (UN14).

• Code: E202-0002
• Description: There is an error in the detection of the CCD home position.
  The attempt to detect the home position fails when the CCD is moved back.
• Remedy: 1. Disconnect and then connect the flexible cable(Reader Controller PCB (UN4)-Main Controller PCB 2 (UN14)). 2. Replace the flexible cable. 3. Replace the CCD HP sensor (S11). 4. Replace the Polygon Motor (M11). 5. Replace the Reader Controller PCB (UN4). 6. Replace the Main Controller PCB 2 (UN14).

• Code: E225-0000
• Description: The light intensity of the CCD is faulty.
  The light intensity of the CCD during shading is under the specified level.
• Remedy: 1. Disconnect and then connect the flexible cable. 2. Replace the flexible cable. 3. Replace the CCD Unit. 4. Replace the Reader Controller PCB (UN4). 5. Replace the Main Controller PCB 2 (UN14).

• Code: E227-0001
• Description: The reader unit power supply (24V) is faulty.
  At time of power-on, the 24V port is off.
• Remedy: 1. Disconnect and then connect the power supply harness connector. (J504/J3/J114) 2. Replace the Power Supply PCB (UN1).

• Code: E227-0002
• Description: The reader unit power supply (24V) is faulty.
  At the start of a job, the 24V port is off.
• Remedy: 1. Disconnect and then connect the power supply harness connector.(J504/J3/J114) 2. Replace the Power Supply PCB (UN1).

• Code: E227-0003
• Description: The reader unit power supply (24V) is faulty.
  At the end of a job, the 24V port is off.
• Remedy: 1. Disconnect and then connect the power supply harness connector.(J504/J3/J114) 2. Replace the Power Supply PCB (UN1).

• Code: E227-0004
• Description: The reader unit power supply (24V) is faulty
  When a load is being driven, the 24V port is off.
• Remedy: 1. Disconnect and then connect the power supply harness connector.(J504/J3/J114) 2. Replace the Power Supply PCB (UN1).