Description: There is an error in the detection of the CCD home position.
The attempt to detect the home position fails when the CCD is moved forward.
Remedy: 1. Disconnect and then connect the flexible cable(Reader Controller PCB (UN4)-Main Controller PCB 2 (UN14)). 2. Replace the flexible cable. 3. Replace the CCD HP sensor (S11). 4. Replace the Polygon Motor (M11). 5. Replace the Reader Controller PCB (UN4). 6. Replace the Main Controller PCB 2 (UN14).
Description: There is an error in the detection of the CCD home position.
The attempt to detect the home position fails when the CCD is moved back.
Remedy: 1. Disconnect and then connect the flexible cable(Reader Controller PCB (UN4)-Main Controller PCB 2 (UN14)). 2. Replace the flexible cable. 3. Replace the CCD HP sensor (S11). 4. Replace the Polygon Motor (M11). 5. Replace the Reader Controller PCB (UN4). 6. Replace the Main Controller PCB 2 (UN14).
Description: The light intensity of the CCD is faulty.
The light intensity of the CCD during shading is under the specified level.
Remedy: 1. Disconnect and then connect the flexible cable. 2. Replace the flexible cable. 3. Replace the CCD Unit. 4. Replace the Reader Controller PCB (UN4). 5. Replace the Main Controller PCB 2 (UN14).